Skip to content

Nemtek Electric Fence High Volt Timed Light Galv Dark Grey

R 153.24

Electric fence high volt timed light. Indicates power on the electric fence. The frequency of the flashing LEDs indicates the voltage level on the fence. The longer the period between flashes, the lower the voltage on the fence. The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.

Features

  • The fence light flashing rate changes with the change of voltage on the fence
  • Indicates power on the fence for peace of mind
  • Visible from up to 1km at night and 100m during the day
  • No batteries required
  • Uses minimal power from the fence
  • The frequency of the flashing LEDs indicates the amount of energy on the fence
  • The longer the period between flashes, the lower the voltage on the fence
  • Highly visible LEDs allow for a 160-degree viewing angle
  • This allows the light to shine into the secure area only
  • Can operate from 0.9kV to 12kV
  • Can be used with most electric fence energizers

Specifications

  • Material: Plastic and water tight compound
  • Connector Wires: Galvanised
  • Flashing Rates
  • Normally rate: Over ~7.5kV
    • 25% slower than normal: between 7.5kV~3kV
    • 50% slower than normal: between 3kV~2.5kV
    • 75% slower than normal: less than ~2.5kV

SR-FL/TL/G